CONTEC Portable Oxygen Meter Blood Oxygen Monitor (8 Months Warranty)
Contec Fingertip Pulse Oximeter
fingertip oxygen meter Using the principle of measuring light waves emitted through the user's fingernails and measure the display value on the screen of the machine Using the principle of adsorption spectrum of hemoglobin (Heboglobin) type composed of oxygen molecules. and used to calculate the oxygen saturation by mathematical formula
CONTEC
- Model CMS50D (Fingertip Pulse Oximeter) is different in appearance.
- Model CMS50D1 (Fingertip Pulse Oximeter) is different in appearance.
- Model CMS50D2 (Fingertip Pulse Oximeter) different appearance
- model CMS50E (Fingertip Pulse Oximeter & Heart Rate Monitor)
Model number and registration FDA>. https://www.accessdata.fda.gov/scrIpts/cdrh/cfdocs/cfRL/rl.cfm?lid=434891&lpcd=OCH
> https://www.accessdata.fda.gov/cdrh_docs/pdf9/K090671.pdf
fingertip oxygen meter It was used during the covid epidemic. Self-measurement of blood oxygen can tell if lung function is normal. by the values measured after exercise It must be equal to or greater than the value measured before exercise. If the measured value is less than 3% of the original value, a medical examination and further examinations should be made with a doctor.
The screen tells the blood oxygen saturation (SpO2) and pulse (Pulse).
The normal value of the oxygen level measured is 96-100%.
The upper digit is the blood oxygen level. in percentage
The bottom number is the heart rate. The unit is times/minute.
Blood oxygen saturation can tell the changes in the lungs Therefore, it is used to assess the severity of diseases that occur in the lungs. to avoid misinterpretation But the fingertip oxygen meter is not used to directly check for symptoms of COVID-19. Other symptoms must be looked at. of the disease together Users should be diagnosed with a history from an expert.
Source: Synphaet Hospital
SpO2 measurement level range : 0%-100%
PRbpm measurement level range : 30bpm - 250bpm
The OLED screen has a 4-way auto-rotate sensor.
Display of SpO2, blood oxygen and pluse rate, heart rate
There is a notification If the finger is not in line with the fingertip sensor
There is a notification low battery
The machine automatically turns off if no signal is detected.
accessories inside the box
AAA batteries x 2 cubes
Neck strap x 1 x
English user manual x 1 set
Material: ABS plastic
Length : 5.7 cm.
Width : 3.1 cm.
Height : 3.2 cm.
- Display Format: OLED Display
- Pulse Rate Measuring Range: 30 bpm - 250 bpm
- Power Consumption: Smaller than 30mA
- Resistance to surrounding light: The deviation between the value measured in the condition of human-made light or indoor natural light and that of darkroom is less than ±1%.
- It is equipped with a function switch. The Oximeter can be powered off in case no finger is the Oximeter within 5 seconds.
Fingertip blood oxygen monitor It cannot be used to detect COVID-19 in the body.
