Wall mounted automatic spray dispenser Size 1200ml and 2200ml
Automatic Wall-mounted Liquid Sprayer
💦 Automatic spray dispensing within 0.25 seconds.
💦 Can be connected to USB power directly / or use batteries (AA) instead.
💦 Automatic hand detection within 40cm.
💦Slide button to select 2 power modes (USB powered / or battery powered)
💦 Support environment use 3-40℃
🦠 How to open the machine mask frame
- Machine capacity 1.2L
Use the key that came with it. press down on top before pulling the cock open
- Machine capacity 2.2L
Use your hand to lock the circle counterclockwise. Before pulling the lid frame in an upward direction to open it
🦠 Use batteries without plugging in. (In the case of not connecting the power directly with the USB cable)
- Machine capacity 1.2L
Use 4 pieces of size C 1.5V batteries.
- Machine capacity 2.2L
Uses 4 AA size 1.5V batteries.
Notes:
1.Leave at least 40cm space under the machine to prevent malfunction. The distance from any surface at least 40cm to prevent malfunctions.
2.Do not install the alcohol dispenser in places exposed to strong sunlight or strong reflective objects. Be careful of the installation site near high heat. or strong sunlight Because alcohol can react with high heat.
3.Do not allow objects to block the liquid outlet. Avoid solid. Close the liquid supply port.
4.Keep the liquid inside the alcohol spray machine clean without other strip or block impurities. Liquid Filled alcohol hall hands are clean. There are no contaminants or solids that could clog the unit.
5.Do not expose the soap dispenser directly to water. Waterproof material, but avoid to install the place where liquid, outdoor, direct rain.
6.If the container contains liquids during disassembly, do not lay it flat. Otherwise, the liquid may flow out and soak into the motor or circuit board and damage the product. While the machine is added to the liquid. If the unit is removed, it should not be placed horizontally. to prevent liquid from leaking onto damaged circuit boards Hold it vertically only.
Warning:
> every time you add a new liquid Always turn off the machine first. for safety
* For the first time using the 2.2L machine after the first time filling It is recommended to press the internal pump by hand 4 times for effective spray dispensing.
> In the case of using an adapter to charge The voltage must not exceed 5V (volts) according to the manual.
> In the case of charging power into a rechargeable battery (not plugged into USB to provide power directly) If there is a red indicator light for more than 4 hours, stop charging immediately by unplugging it. to prevent problems that may come later
Installation method Installation:
1. Open the top cover. Pry open the lid off first.
2. Attach the disinfector to the wall with screws. The machine is equipped with a screw nut. or tape screw nuts to the wall
3. Install the battery. Insert the battery / or choose the USB power cable.
4. Pour the disinfestant into the bottle. Turn off the power before adding the alcohol liquid.
5. Close the top cover. Close the machine mask frame.
6. Place your hand under the nozzle to spray the disinfectant automatically. Test the spray dispensing sensor as usual.
Package Include what customers will receive :
1 * Disinfector Automatic Spray Dispenser
1 * Instruction manual, instruction manual and installation method
2 * Self tapping screw adhesive tape or wall screws
1* USB plug USB power extension cable
Wall-Mounted Automatic Hand Sanitizer Dispenser, Touchless Hand Sanitizer Sprayer