4G Wireless Router Router Insert SIM, distribute the signal 4G, support microSim of all networks.
 How to install video: https://youtu.be/FaJzxdFCMv0
 Chipset: MTK7628KN 300Mbps
 Basic Frequency: CPU: 580MHz DDR: N / A Ref: 40MHz
 Standard: 2.4G: 300M 802.11b / g / n MIMO Technology
 Memory2: MB DDR RAM
 Flash: 8MB
 Interface: 4 * 10/100 Mbps LAN / WAN adaptive network interface, 1 SIM card slot
 Button: 1 * Reset button, long press for 3 seconds and above to restore factory settings, 1 * WPS button, short press to open WPS function
 Indicator light: WPS LED ， WiFi LED ， 4G LED ， LAN LED ， Power LED
 Power Supply: DC 12V 1A ， Power Consumption ﹤ 8W
 Operating / StorageTemperature: Temperature ： -10 ° C ～ + 50 ° C （Operating） ， - 40 ° C ～ + 70 ° C （Storage） Humidity （Non-condensing） ： 5 ％ ～ 90 ％ （Operating） ， 5 ％ ～ 95 ％ （Storage ）
 Size: N / A
 Weight: N / A
 Antenna: 2.4G (802.11n) 2T2R: 5dbi * 2 4G 2T2R: 5dbi * 2

 4G wireless router uses the MTK7628KN chipset to design an integrated wireless solution for small office and high-end home users. The device complies with the IEEE 802.11n standard, supports multi-WAN overlay, behavior management, wired and wireless integrated management functions, which make network management more simple, and more hierarchical sub-authority management function, much reduce the network management workload. The maximum wireless transmission rate is up to 300Mbps. Energy-saving modes, standard modes, and through-wall modes can be intelligently defined through the RF options on the front page; MIMO technology is used to provide better wireless transmission performance, stability, and wireless coverage. Support 64/128-bit WEP encryption, 128 bit WPA standard encryption (TKIP / AES), support multiple SSID simultaneous broadcast, is your preferred device for wireless Internet access.The product supports IEEE802.3az, which can enter a low-power mode. in a transceiver without a transmittable frame. When a new frame arrives, the transceiver will return to the active mode within a few microseconds, thus implementing the protocol. The upper layer is almost transparent and energy efficient. It can automatically adjust the energy consumption according to the actual flow of the port, and can quickly switch between full-speed operation and low-power idle mode, saving users 30% of power consumption and greatly reducing operating costs. The wave velocity forming technology. can automatically adjust the signal weighting value of each array element in the array when the interference direction is unknown, so that the zero point of the antenna pattern is aligned with the interference direction to suppress interference, and enhance the detection capability of the system useful signal , and optimize Antenna pattern, and can effectively track the useful signal, suppress and eliminate interference and noise, and successfully suppress interference even when the multi-interference and the same frequency are distributed at close distances.

 What you will receive
 1 x Router
 1 x LAN cable
 1 x Wall nut
 1 x Manual in English and Thai